Support Center

Advanced Basic DC 4 Signal Conditioner

A perfect solution to bringing in a variety of high level signals from instruments such as flow meters, transducers, and gas analyzers. This signal conditioner provides a simple connection to the analog output of many laboratory devices using standard BNC connection, without the need for special interface cables. 


If more than 4 signals are required, researcher may wish to consider the Advanced Basic DC 32 Signal Conditioner (ABDC 32); capable of sampling up to 32 sources at one time from just one module. 

SPECIFICATIONS

General    
# Channels                         4 Single ended
Type of Coupling   DC
Resolution   16 Bits
Maximum Rate   250K Samples / second per Channel
Digitizer   Multiplexed
     
Signal Input    
Input Impedance   100kΩ to each input
Input Range   ± 1.25, 2.5, 5, 10, 20V Full Scale
    0 - 1.25, 2.5, 5, 10, 20V Full Scale
Maximum Input   + 50V DC, AC Peak
(Max without damage)  
     
Analog Bandwidth   DC - 10 kHz
     
Accuracy Specifications    
Gain Accuracy, % of FS   <0.7%
Offset Accuracy, % of FS   <0.5%
Linearity, % of FS   <0.2%
Noise, % of FS   <0.5%
Common Mode Voltage   +20V
Common Mode Rejection   ≥-80dB
Crosstalk (60Hz)   <60dB

 

 
 
 
 
 
 
 
 
 

Advanced Basic DC 32 Signal Conditioner

ORDERING INFORMATION

Part Number   Description
13-7715-04   Advanced Basic DC 4 Signal Conditioner
     
Specifications are current at publication.
Due to DSI’s continuing product improvement program, specifications may change without notice.